NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

todonal's avatar
todonal
Tutor
Mar 06, 2020

RAX80

My ISP has a 192.168.1.254 IPv4 and this new router is running at 10.0.0.1 for its IPv4. I tried to reset the IPv4 to a 192.168.1 scheme using a smaller subnet mask but the router config bounced. Is ...
Christian_R's avatar
Christian_R
NETGEAR Employee Retired
Mar 12, 2020

Hello todonal, 

 

Would you mind letting me know if you have more than 1 router connected to each other. 


Thanks,
Christian 

todonal's avatar
todonal
Tutor
Mar 12, 2020

This Nighthawk is running thru an ISP gateway from AT&T using the IP address I mentioned in my original post. I turned off all wifi functions in the ISP gateway. I believe I might know the answer to my question but if someone cares to offer something I will compare to my solution and see if we agree.

  • Christian_R's avatar
    Christian_R
    NETGEAR Employee Retired
    Mar 13, 2020

    Hello todonal, 

     

    Please try setting the gateway to modem mode only to see if your issue persists. 

     

    Christian 

    • todonal's avatar
      todonal
      Tutor
      Mar 14, 2020

      I fixed it. I tried to set up the AT&T gateway to config this RAX80 as a Cascade Router with the new IP and subnet but it didn't want to cooperate. I am good now. Thank you