NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAXE500 - Multiple devices in "Attached Devices" with different subnet
I have a RAXE500. Latest firmware ( V1.2.13.100_2.0.54). I have the subnet range set at 192.1.168.xxx, but for some reason, there are several devices that show up in the 10.0.0.x range. This is ha...
What mode is the RAXE working in? Router or AP mode?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Thank you for the reply!
The router is working in router mode.
The modem is a Nighthawk CM2050V (self purchased and configured remotely via my ISP (Infinity)).
what is the wifi network name (SSID) you're seeing with the 10.0 /16 subnet IP address?
maybe you've inadvertently connected to a nearby Xfinity hotspot?
Well theres no router in the CM series of modems so different subnet would not be coming from that.
Can you show us a picture of what your seeing on the RAXEs web page for connected devices? Redact any MAC addresses before posting.
GCFalcon1989 wrote:
Thank you for the reply!
The router is working in router mode.
The modem is a Nighthawk CM2050V (self purchased and configured remotely via my ISP (Infinity)).