NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Ethan_Kuo's avatar
Ethan_Kuo
Tutor
Mar 02, 2022
Solved

RAXE500 can not pass NAT device through WiFi, but it is ok if device through LAN

Hi  As subject (RAXE500 can not pass NAT device through WiFi, but it is ok if device through LAN). So, I would like to know the NAT is only support device connected with LAN cable? Here is my test...
  • Ethan_Kuo's avatar
    Ethan_Kuo
    Mar 15, 2022

    Dear all

    The problem is solved by network setting cause by our internal gateway setting. (for special reason the setting of gateway is not same as DHCP server if unit want to connect to internet.)

    and 2nd is check the ip in router (RAXE500) to make sure that can find it and the IP is correct.

     

    Thanks.

Ethan_Kuo's avatar
Ethan_Kuo
Tutor
Mar 14, 2022

Hi Altsai

Maybe as your guess, but I did not enable any firewall in router.

Thanks.

Ethan_Kuo's avatar
Ethan_Kuo
Tutor
Mar 15, 2022

Dear all

The problem is solved by network setting cause by our internal gateway setting. (for special reason the setting of gateway is not same as DHCP server if unit want to connect to internet.)

and 2nd is check the ip in router (RAXE500) to make sure that can find it and the IP is correct.

 

Thanks.