NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAXE500 Disappointing
Raxe500 Firmware Version V1.0.10.86_2.0.40 I have 2 gigabit fiber ATT internet with the BGW320-500 modem in passthrough. Cat 7 cable plugged into the 5gb ethernet port on the BGW320 going to the 2....
This what the statistics show, i have double checked passthrough. and wan 2.5 port ip and mac are set in bgw320.
all firewall in bgw320 is disabled except packet filtering. should i disable that?
Show Statistics |
System Up Time 17:08:18
| Port | Status | Tx | Rx | Collisions | Tx B/s | Rx B/s | Up Time |
| WAN(Multi-Gig Port) | 2500M/Full | 13660615 | 16347580 | 0 | 277140 | 261568 | 13:51:58 |
| LAN1 | 1000M/Full | 606120 | 427432 | 0 | 8009 | 890 | 17:06:19 |
| LAN2 | 1000M/Full | 1562280 | 3105671 | 0 | 4449 | 52633 | 17:06:20 |
| LAN3 | 1000M/Full | 593120 | 351395 | 0 | 2536 | 6235 | 17:06:21 |
| LAN4 | 1000M/Full | 409534 | 6733 | 0 | 1529 | 7 | 17:06:22 |
| LAN5 (Internet Port) | Link Down | -- | -- | -- | -- | -- | -- |
| 2.4G WLAN b/g/n/ax | 1200M | 2813889 | 6556298 | 0 | 8267 | 97956 | 17:08:18 |
| 5G WLAN a/n/ac/ax | 4800M | 12600547 | 8426458 | 0 | 269053 | 122285 | 17:08:18 |
| 6G WLAN ax | 4800M | 308662 | 0 | 0 | 1032 | 0 | 17:08:18 |
Have you tried leaving the BGW in router mode (disable its wifi) and put the netgear in AP mode? I've seen their passthrough mode not work properly and att has zero motivation to fix it.