PS101+HP2100TN+Windows 10 set up help please.

Assuming the hardware and embedded firmware does still work after the years .... and there are workable printer drivers for your HP.

Step one: Forget any utilities - nothing required.

Does the PS101 get an IP address assigned from your router DHCP server? Check the connected device or DHCP table for the MC address printed on the PS101 label and find the IP address.

Test the connectivity by using a web browser accessing the PS101 by http://[IP-address] e.g. http://192.168.1.123

You can add a reservation for the IP address so the PS101 does always get the same IP address on your network.

At this point, you have two options. These print servers came with these specs:

Protocol Support:
- TCP/IP, NetBEUI, DHCP client
Printing Methods:
- PTP (Peer-to-Peer) and SMB over TCP/IP and NetBEUI protocols, Windows LPD printing

Version LPD/LPR:

Use Windows 10 to add an LPD printer on the PS101 LAN IP address - if you can't figure out on Windows 10 google for "windows 10 add lpd printer"

Version SMB over TCP/IP and NetBEUI:

Windows 10 has removed SMB 1.0/CIFS support by default (unless it way always in use on existing configurations) including the NetBEUI discovery and name resolution feture (that's what we need here). Add the Windows Feature "SMB 1.0/CIFS File Sharing" -> "SMB 1.0/CIFS Client" (simply search "Features" on Windows 10 and head to something "More Windows features"). All you want to have on your system is the ability to hain the NetBEUI discovery and name resolution - now the printer (resp the PS101) does become visible to Windows 10 and adding should be straight forward.

This is it. 

Note: I've never in my life installed a PS101. 8-)