NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear Genie keeps closing - A7000
I'm trying to use the A7000 on a desktop running Windows 10 with no built-in WiFi support. I got to the point where the adapter is recognized in Device Manager and the Netgear Genie opened and began...
Turns out WLAN AutoConfig was disabled! After enabling it, everything is working perfectly.
Tried without installing the genie?
Netgear's wifi adapters offer a "standalone" driver only option.
Sometimes Microsoft native drivers will work without anything from Netgear.
That also didn't work. Nothing happens once it's installed, and it's the same set of errors.
Windows is sent to try us.
You might need to seek ideas in the wider world of Microsoft. Perhaps you need to clean out the past debris from Windows drivers.You may also need to ensure that the motherboard level of USB drivers is up to date. That's usually more a problem at the LAN level but you never know.
Turns out WLAN AutoConfig was disabled! After enabling it, everything is working perfectly.
FizzNet wrote:
Turns out WLAN AutoConfig was disabled! After enabling it, everything is working perfectly.
Windows strikes again.
How did you pin it down?
Was it something that the network wizard would pick up?
Might help another poor victim in future.