NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
2.4 ghz and 5ghz band issue in R8000 and EX6200V2
Hi there, I have an issue with my EX6200V2 and my R8000 router. When I look at the extender menu page it tells me that the 5 ghz band is operating but, when I look at the routers page, it says it i...
Your attached devices page from the R8000 might not be 100% accurate. I'm not sure why the ER-24 is showing for all the 2.4ghz devices.
But the picture does show the EX6200 connected to the 5ghz with the .13 ip address. If its connecting 2 seperate bands, it'll pull an ip address for each when not running in fastlane mode. Its basically like 2 different devices connecting to the router when running in standard mode.
This is the second pic and is of the router. The IP address is rubbed out but the one listed as 17 is the extender.
Your attached devices page from the R8000 might not be 100% accurate. I'm not sure why the ER-24 is showing for all the 2.4ghz devices.
But the picture does show the EX6200 connected to the 5ghz with the .13 ip address. If its connecting 2 seperate bands, it'll pull an ip address for each when not running in fastlane mode. Its basically like 2 different devices connecting to the router when running in standard mode.