NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
compatibilità tra R8000P e extender
Ciao a tutti, possiedo un router R8000P e ho bisogno di affiancargli un extender. Vorrei un aiuto per capire quale, per caratteristiche, è il più adatto tra EX8000, EAX20 e EAX80 per l'R8000P. Preme...
If you're near an area with radar, whenever it picks up radar, it has to switch of dfs channels. It can cause drops/irregularity in service if your in one of those areas .
Another thing you can try is the R8000P is the backbone of the system. Maybe its having issues on that firmware. the firmware I'd recommend is 1.4.1.42 for that router. Install it over a hardwired connection. then do a factory reset and clean install (not using a backup). disable auto-updates and try it for a period.
You already have the EX7500? Its fairly solid with a decent firmware.
which version are you on of the firmware?
What 5ghz band are you using for the backhaul? The higher bands or the lower bands?
thanks for the reply, installed firmware version is V1.0.0.72_1.0.78
this is 5GHz status: channel 100(P) + 104 + 108 + 112
every day the connection drops and I have to reset it. does not work...
thank you very much!!
the channels youre on are dfs channels.
Have you tried using different channels on the for both the backhaul and the fronthaul?
what firmware is on the R8000P?
yes dfs, is it wrong? the firmware of the R8000P is V1.4.1.64
If you're near an area with radar, whenever it picks up radar, it has to switch of dfs channels. It can cause drops/irregularity in service if your in one of those areas .
Another thing you can try is the R8000P is the backbone of the system. Maybe its having issues on that firmware. the firmware I'd recommend is 1.4.1.42 for that router. Install it over a hardwired connection. then do a factory reset and clean install (not using a backup). disable auto-updates and try it for a period.