NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ex6120
After a change of router, a factory reset to the 6120 and re-setup the 2.4Gz band is working OK, but the 5Gz is broadcasting but I cannot connect any devices to it that were previously connected. Unab...
1. what router did you connect it to?
2. what method of setup did you use? WPS, the installation assistant, the app?
3. a screensnip of the browser error you get might help
4. are you able to access the extender using the IP address the router assigns it?
5. What channel is the 5ghz using on the router?
- Vodafone router
Setup via gui, wps didnt work
Message read 'This site can’t provide a secure connection as the requested website uses an unsupported protocol.'
Unable to access via ip address same message
Not sure of 5ghz channel
Regardswhich vodafone router?
Usually with the site notice, there's a way around it.
https://www.youtube.com/watch?v=n3Mu1z6U8aQ
here's a video of methods you can try.
to find out what channel for 5ghz, log into your router and check it
- Managed to logon to 6120 after clearing browser history
5GHz is using router channels 100(p) +104+108+112, router is set to auto
5GHz on 6120 is set as:
Wireless AP on
Broadcast name on
Wifi protected setup configured
Wifi channel auto
Wifi password same as existing network
Any ideas ?