NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
EX7000 Access Point Mode To Nighthawk X6 working at 100 mbps
Hello Everyone, I have a Nighthawk X6 R8000 router connected over Cat5e cable to a EX700|AC1900 extender. The cable from the router terminates on a Cat5e compatible patch panel and I am using another...
Hi navsonline, what is the firmware version of the router and the extender? Does the issue persist if you have the extender directly connected to the router and not through the patch? Have you tried using another port on the router or another cable? Do your other Gigabit capable wired devices get the expected throughput from the router (with white LED)?
Dexter
Hi navsonline, what is the firmware version of the router and the extender? Does the issue persist if you have the extender directly connected to the router and not through the patch? Have you tried using another port on the router or another cable? Do your other Gigabit capable wired devices get the expected throughput from the router (with white LED)?
Dexter
Hi dexter
I had to re crimp the cable at both ends to resolve the problem. The cable was 10 years old (put in when the house was built) and had a bad crimp. Recrimping jumped the speed to 1 Gig speeds.
I had to re crimp the cable at both ends to resolve the problem. The cable was 10 years old (put in when the house was built) and had a bad crimp. Recrimping jumped the speed to 1 Gig speeds.