NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
EX7300 V2 won’t boot (all lights solid)
Working fine until modem and router reset. Would not reconnect to router. After a little while of trying, extender showed red for both location/router proximity and client proximity. Solid amber power...
Are you able to ping it?
have you tried the 30/30/30 reset?
Push and hold reset for 30 seconds while powered on, power off while continuing to hold reset for 30 seconds, power back on for 30 more seconds while still holding reset.
Do the lights change at all during it?
You might be a canidate for a tftp/nmrpflash recovery.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash