NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
MS60 not connecting with nighthawk c7000v2 modem router
I've been trying to setup our new Mesh Router system (ms60), using a Nighthawk C7000V2 cable modem router as the router. Is it possible that the Mesh system won't connect properly due to the modem be...
do you have the MS60 setup in access point mode or the C7000 in modem only mode?
Otherwise you're in a double nat.
Thank you for your reply. How do I put the C7000V2 into modem-only mode, and is that the same (or different) than bridge mode? Also, is it easier to just get a modem, separate from my modem router?
Thanks again for any assistance!
Also, what is access only mode on the MS60? Sorry I'm such a newbie, but I'll take all the help I can get. 🙂
here's how you put it in modem only/bridge mode.
https://kb.netgear.com/27191/How-to-set-the-cable-modem-router-to-be-on-modem-only
Or you can go with the access point mode.
https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point