NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
DataSwift
Apr 15, 2010Follower
WNDAP350 2.4GHz drops out every few seconds
As the subject states, we've just bought a number of WNDAP350 access points. The wireless functions perfectly on the 5GHz band, but the 2.4GHz continually drops out. I'm trying to borrow a laptop with...
csm746
Dec 31, 2011Novice
This explains the behavior I see when monitoring the access point with inSSIDer....the signal disappears and a few seconds later re-appears....alternating between 2.4 and 5 ghz. But, Rogue AP detection is not checked as being on in either frequency.
In inSSIDer, the 350 is listed as one device and it reflects the two frequencies alternating back and forth on one line showing the same MAC address for both 2.4 and 5 ghz. The WNDR4500 is listed as two separate SSIDs on separate lines with different MAC addresses. May mean nothing operationally, but is noteworthy
In inSSIDer, the 350 is listed as one device and it reflects the two frequencies alternating back and forth on one line showing the same MAC address for both 2.4 and 5 ghz. The WNDR4500 is listed as two separate SSIDs on separate lines with different MAC addresses. May mean nothing operationally, but is noteworthy