NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WNDAP360 losing connection
So I have a WNDAP360, running the latest 2.1.1 firmware. It is setup to be as basic as possible. I have disabled the QoS features, and set the channel. I looked with inSSIDer and got my 2 most free...
I have changed some setting and i can see that the AP is losing the connection to the gateway.
When i use a Ping -t to the gateway i got time outs after that i connecting again.
My Network Genie tells me the same thing.
But when i connect the 5ghz band from my WNDR900 i have no problems.
So the problem is still the AP.
Changed setting are "power save from WMM to disabled", Rogue AP is disabled and i turned on STP.
I have tested from two different laptop on 5GhZ and 2,4
Greetings
DMFVisuals
When i use a Ping -t to the gateway i got time outs after that i connecting again.
My Network Genie tells me the same thing.
But when i connect the 5ghz band from my WNDR900 i have no problems.
So the problem is still the AP.
Changed setting are "power save from WMM to disabled", Rogue AP is disabled and i turned on STP.
I have tested from two different laptop on 5GhZ and 2,4
Greetings
DMFVisuals