NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WNDR3400 v2 providing incorrect IP addresses via repeater
This setup is for my office, I have 3 WNDR3400v2's they are used nothing more than for Wireless, my main router or command station is in my server room and i have 2 repeaters on each side of the build...
Assume 2 Device in two building is using ethernet cable back to the main router?
If so use AP mode in the router GUI and use internet port on 2 remote WNDR3400. Internet port will change to AP mode and disable all firewall feature and you will make SINGEL network with 192.168.0.x
From what I see is you have 10.0.x IP so you have 2 device is using internet port and connected to existing network. This just common installation 9 out 10 consumers install it. It will work as is but I would use AP mode per suggested and make single network
If so use AP mode in the router GUI and use internet port on 2 remote WNDR3400. Internet port will change to AP mode and disable all firewall feature and you will make SINGEL network with 192.168.0.x
From what I see is you have 10.0.x IP so you have 2 device is using internet port and connected to existing network. This just common installation 9 out 10 consumers install it. It will work as is but I would use AP mode per suggested and make single network