NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
AC1200 router only working for Kindle Fire and not laptop or phone
I lost wifi signal yesterday for both my laptop and (android) phone. However, my Kindle Fire has wifi signal and is working fine. Any idea what is happening? Do I need to buy a new router?
The issue has been solved - it turned out to be with my ISP and not my router. (Happy not to have to buy another router yet.)
The model number of my router is R6220 (-100NAS).
I don't know what firmware version (sorry, I am not too technical - should I take a pic of the tech specifications from the box and attach it on here?).
I do not use a modem. My ISP is a local San Francisco company called Monkeybrains, and I connect directly their wall jack to my router using an ethernet cable.
I lost wifi a couple of days ago, and Monkeybrains has been resetting signals on their end and claimed to have fixed the problem. When I did a direct connection (bypassing the router), I do get wifi signal, although it's slower than usual.
What I don't understand is that, going through the router, I do get strong wifi signal on my Kindle Fire device. However, no wifi signal for my laptop or my android phone.
Does that mean that the router is working somehow but needs to be reset? Should I next try to reset my router to the original factory settings? If so, any tips for that? Many thanks.
sfvoyage wrote:
I do not use a modem. My ISP is a local San Francisco company called Monkeybrains, and I connect directly their wall jack to my router using an ethernet cable.
That sort of setup is not typical. It may be that your ISP has some sort of router further up the chain, which means that you might have to put the R6220 into access point mode.
Manuals are always a good place to start.
Visit the support pages:
Support | NETGEAR
Feed in your model number and check the documentation for your hardware.
You may have done that already. I can't tell from your message.
I mention it because Netgear gave up on supplying paper manuals and CD versions some years ago and people sometimes miss the downloads.
Yes, my ISP has their equipment box in a closet (one floor below) that services several units in my building.
Thanks for the link to the user manual. The product did not come with any documentation.
By the way, my neighbor on the same floor had problems with the same ISP the past few days. It turned out to be a router (TP-Link AC2300) problem for him. He called TP-Link support, and the technician changed some settings remotely, which fixed the problem for him.
Unfortunately, Netgear only provides phone support for 90 days, and I had purchased my router almost 4 years ago.
Should I go ahead to reset my router to the original factory settings at this point?
The issue has been solved - it turned out to be with my ISP and not my router. (Happy not to have to buy another router yet.)
Good news.
Can you tell us what the problem was? And the ISP?
Might help another victim in the future.
(Happy not to have to buy another router yet.)That ma
Some people grasp at any opportunity to buy new kit.