NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
AC1750 won't power on
Bought an AC1750 router at the end of October. It worked fine until I returned from the holidays to find it dead - no power, no lights, anything. I replaced the adapter, and it worked until this past...
Try a different power adapter and see if it turns on. Could be there is alot of power surges where you have your router. Sometimes even power strips can't protect electronics 100% of the time. Could have been fried if there's alot of power surges and power outages.
> [...] I replaced the adapter, and it worked until this past week when
> it died again.
What makes you think that the second adapter is not the new problem?
What are the ratings of these adapters? Do you own a voltmeter? (Or
know someone who does?)
One bad adapter sounds like bad luck. If the second one was a proper
replacement, then it shouldn't die for years. Knowing nothing about
what's in either of your adapters, or what failed in them, it's hard to
say much with confidence, but I would not expect any fault in the router
to damage its power adapter, but then work properly with a replacement
adapter (even for a relatively short time). Of course, many things are
possible.
I suppose that you weren't carefully monitoring the temperature of
these adapters while they were in use.
> Bought an AC1750 [...]
Not that it matters much in this case, but, for future reference,
note that "AC1750" is a speed, not a model number. Ever helpful,
Netgear product packaging emphasizes speeds like "ACxxxx", but that's
not the model identifier. Look at the product label. "R6400" would be
a model number.
Try a different power adapter and see if it turns on. Could be there is alot of power surges where you have your router. Sometimes even power strips can't protect electronics 100% of the time. Could have been fried if there's alot of power surges and power outages.