NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

cyoung299's avatar
cyoung299
Follower
Jan 28, 2023
Solved

Adding additional router to Nighthawk R6400

Limited knowledge, so be gentle please.  I have a Nighthawk 6400 that I want to add an R6100 onto.  Goal is to extend the range of my wireless network by means of ethernet cable to locate the R6100 a...
  • microchip8's avatar
    Jan 28, 2023

    - Set the R6100 to AP Mode (Access Point Mode)
    - Connect the R6100 with a cable to one of the LAN ports on the R6400
    - Configure the WiFi on the R6100. Make sure to use a different channel than on the R6400 for both 2.4 & 5 GHz. You can find the IP address of the R6100 in the R6400's connected devices. I recommend reserving an IP address for the R6100 on the LAN/DHCP page on the R6400 so it always gets the same IP from the R6400. You can do this by logging in to the R6400 using a browser and http://routerlogin.net or http://192.168.1.1