NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Ghila96's avatar
Ghila96
Aspirant
Nov 03, 2016
Solved

Cascade Router

Hello everybody, I cascade Netgear DGND3700v2 to a modem of my provider (LAN to LAN). I followed this steps:   1) Adapt DHCP range (for main modem in set from 192.168.0.2 to 192.168.0.254 and its ...
Troubleshooting
  • Retired_Member's avatar
    Retired_Member
    Nov 06, 2016

    You're Welcome,

     

    search the web for your ISP modem and or call ISP and ask them to place it in bridge mode OR purchase a Access Point.

Retired_Member's avatar
Retired_Member
Nov 03, 2016

Time info is routed thru the WAN port if WAN isn't used it will not update

  • Ghila96's avatar
    Ghila96
    Aspirant
    Nov 04, 2016

    Thank you for reply,

    There is no way to set manually time?

    And for the other problem what is the solution?

    Thank you!

    • Retired_Member's avatar
      Retired_Member
      Nov 04, 2016

      You're welcome,

       

      You're using the router in a way it was not intended to be used, So it has limitations, when WAN port is not connected time won't sync, and turn off WIFI via schedule won't work either. 

      • Ghila96's avatar
        Ghila96
        Aspirant
        Nov 05, 2016

        Thank you for reply,

        I put router in cascade (LAN to LAN) because of provider router (that is imposed by my provider) limitation. So, if I put the router in cascade, but in LAN to WAN mode, I could solve both problems?