NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Ghila96's avatar
Ghila96
Aspirant
Nov 03, 2016
Solved

Cascade Router

Hello everybody, I cascade Netgear DGND3700v2 to a modem of my provider (LAN to LAN). I followed this steps:   1) Adapt DHCP range (for main modem in set from 192.168.0.2 to 192.168.0.254 and its ...
Troubleshooting
  • Retired_Member's avatar
    Retired_Member
    Nov 06, 2016

    You're Welcome,

     

    search the web for your ISP modem and or call ISP and ask them to place it in bridge mode OR purchase a Access Point.

Retired_Member's avatar
Retired_Member
Nov 03, 2016

Time info is routed thru the WAN port if WAN isn't used it will not update

Ghila96's avatar
Ghila96
Aspirant
Nov 04, 2016

Thank you for reply,

There is no way to set manually time?

And for the other problem what is the solution?

Thank you!

  • Retired_Member's avatar
    Retired_Member
    Nov 04, 2016

    You're welcome,

     

    You're using the router in a way it was not intended to be used, So it has limitations, when WAN port is not connected time won't sync, and turn off WIFI via schedule won't work either. 

    • Ghila96's avatar
      Ghila96
      Aspirant
      Nov 05, 2016

      Thank you for reply,

      I put router in cascade (LAN to LAN) because of provider router (that is imposed by my provider) limitation. So, if I put the router in cascade, but in LAN to WAN mode, I could solve both problems? 

      • Retired_Member's avatar
        Retired_Member
        Nov 05, 2016

        No!  you need an Access Point