NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Downloaded firmware 1.02.90 and lost wifi to cell phones
My router box has 2 green lights on the left hand side and the #4 light is amber. I must admit I interrupted the download of the firmware. Now my computer says the connect is unprotected and my pho...
mindset2014 wrote:
My router box has 2 green lights on the left hand side and the #4 light is amber.
Which one is #4?
mindset2014 wrote:
I must admit I interrupted the download of the firmware.
Not a wise move. You may have "bricked" the thing.
There is a manual for the device somewhere at the end of this link:
>>> WNDR4300 | Product | Support | NETGEAR <<<
See page 123, Troubleshoot with the LEDs.
If you can get into the device's browser interface, then you can check the firmware to see if it worked.
mindset2014 wrote:
My router box has 2 green lights on the left hand side and the #4 light is amber.
Which one is #4?
mindset2014 wrote:
I must admit I interrupted the download of the firmware.
Not a wise move. You may have "bricked" the thing.
There is a manual for the device somewhere at the end of this link:
>>> WNDR4300 | Product | Support | NETGEAR <<<
See page 123, Troubleshoot with the LEDs.
If you can get into the device's browser interface, then you can check the firmware to see if it worked.
Righto! I am an idiot. But I am used to it. After much research and much cussing and slamming the boxes on the deck, it is now back to its normal. Thank you for taking the time to answer.
mindset2014 wrote:
...much cussing and slamming the boxes on the deck...
I should have added that these are perfectly acceptable tactics when trying to fix problems with these things. They often work better than reading manuals.