My R6400v2 has stopped broadcasting the Wireless Network (5GHz a/n/ac)

Urvang
Aspirant
Apr 28, 2023
Thanks for the quick response ! Yes I have checked again and confirming that all LEDs are ON
- michaelkenward
  Guru - Experienced User
  Apr 28, 2023
  And the other question?
  
  What tells you that the WiFi has stopped broadcasting?
  
  Another one, what is the (5GHz a/n/ac) bit about?
  
  Does that mean that it is only the 5 GHz wifi?
  
  What firmware version do you have on the device?
  
  A number is more useful than "the latest". (It may not be by the time people read this.) There can also be newer versions, or "hot fixes", that do not show up if you check for new firmware in the browser interface.
  
  It might also help if you told people what the modem is in front of this router, if there is one. The make and model number could be useful. Is it, by any chance, also a router, with a set of LAN ports on the back?
  
  The reason for asking is that a lot of people turn up here trying to put a router behind a modem that is also a router. That can complicate troubleshooting.
  - Urvang
    Aspirant
    Apr 28, 2023
    Hi - I'm trying to respond on your questions / queries -
    
    What tells you that the WiFi has stopped broadcasting?
    Wireless Network 2.4GHz is working fine but 5GHz band is not working at all. I can't see SSID in any of the device. However, 5GHz network is working fine with the LAN cable.
    
    Does that mean that it is only the 5GHz wifi?
    Wireless Network 2.4GHz is working fine but 5GHz band is not working at all. I can't see SSID in any of the device
    
    What firmware version do you have on the device?
    Router Firmware Version is V1.0.4.128_10.0.104. This is the latest version what I have checked on the Netgear site.

Forum Discussion

My R6400v2 has stopped broadcasting the Wireless Network (5GHz a/n/ac)