N750 WNDR4000 big issue

Question

Hi all,&nbsp;&nbsp;I'm french but I'll write in english, so excuse me if my english is not so good.&nbsp;I had an issue with my router, it was only delivering APIPA on LAN and cannot register to my internet router (WAN IP 0.0.0.0)I thought it might be because of the firmware or whatever, I upgraded it--&gt; not betterI tried to instal DD-DWRT (from that thread :&nbsp;https://wiki.dd-wrt.com/wiki/index.php/Netgear_WNDR4000)--&gt; SameSo I wanted to come back to stock with Netgear Firmware : didn't workSo I tried the part "Reverting to stock", but cannot access the router through the lan, and no wifi anymore&nbsp;Now, the power led blinks (green), no IP from then lan (APIPA), no wifiTried to fix my IP but cannot ping 192.168.1.1 (also tried 192.168.0.1)I tried the 30/30/30 but didn't work better.&nbsp;I'm stucked...&nbsp;Is there any possibilities to connect to my router and put the original firmware ?Through USB maybe, or maybe another way inside the router....I don't know.&nbsp;thank you all for your help

RVALENZ · Answer

Welcome to NETGEAR Community!

&nbsp;

Try using TFTP in reverting the Netgear firmware.&nbsp;

&nbsp;

https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client

&nbsp;

Regards,
Rhys
Community Team

Corly · Answer

unfortunately this does not work either.I cannot ping the gateway.I cannot connect throufht tftp.it's weird, I think the router is dead :(

RVALENZ · Answer

If TFTP still fails, most likely the router is dead.&nbsp;

&nbsp;

Regards,
Rhys
Community Team

michaelkenward · Answer

TFTP isn't the easiest thing to get right.
&nbsp;
This&nbsp;doesn't offer much in the&nbsp;way of clues.
&nbsp;
Corly&nbsp;wrote:
I cannot ping the gateway.
I cannot connect throufht tftp.

&nbsp;
We don't know what you did to get there.
&nbsp;
If a standard factory reset fails, there is more severe, recovery reset, that you could try:
&nbsp;

Press reset for 30 seconds

Keep pressing reset while removing power

Keep pressing reset for another 30 seconds while apply power

If you are forced to use TFTP try a web search for videos that guide you through the process.
&nbsp;
For example:
Different device, but the approach is the same.

Corly · Answer

michaelkenward&nbsp;Thank you for the tips but I already knows how to use tftp.I'm a Sys &amp; Network admin so I uses tftp and routers through my job&nbsp;The issue was the router cannot get an IP from my internet router, who delivers correct IP to others equipments.And, without WAN, the Netgear router did not deliver correct IP, even with the DHCP correctly configured.So I tried to upgrade the firmware : nothing better.I tried to downgrade : sameI tried to put DD-DWRT : sameso I wanted to come back to the original firmware and power led started to blinkI already tried the 30/30/30 reset, and tftp doesn't work (server unreachable)&nbsp;I think ther's nothing else to try, I thought it may exist another way to upload a firmware but I understood tftp was the last chance..So, the router seems to be dead, I will see to buy another one ;)&nbsp;thank you all for your help

Forum Discussion

N750 WNDR4000 big issue

5 Replies