NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear r6300v2 Router after firmware version 1.0.4.6 update won't connect with remote PC
After installing firmware number 1.0.4.6 I cannot connect via my remote PC which should be online sending data to the US Weather Bureau and the Weather Underground 24 hours a day. However, I cannot c...
Hi aznetcowboy,
1.If you have not done it yet, it is recommended to perform a factory reset after a firmware update. The link below may help out.
http://kb.netgear.com/app/answers/detail/a_id/9665
2. Make sure the weather PC can ping the other devices on the network and vice versa.
Regards,
Dexter
Community Team
Thanks for the idea of doing the ping. I never gave that the first thought.That helped me narrow down my problem and my Weatherlink unit is communicating. I also changed my dhcp setting from 192.168.1.1-254 to 192.168.0.100-199 which where my units were set up before. I suspect that was a major part of the problem, but the Pinging sure helped.
Thanks again!
:manvery-happy: