NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
R6220 Shows only USB LED
Hello, I got this router few months back. It was working fine up until today when I saw a firmeware upgrade available and started the upgrade. I lost access to the router midst upgrade. The Wirel...
A couple things.
1. if you just bough it, it should have 90 days of free support from date of purchase or potentially still be warrantied. Click "mynetgear" at the top, register an account and the device. From there you can check your support options.
2. many steps using tftp can fail. I'll include a the instructions link and a video walk through.
re you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through.
https://www.youtube.com/watch?v=R9DLrLQrpaw
3. if that doesn't work, you can try nmrpflash.
A couple things.
1. if you just bough it, it should have 90 days of free support from date of purchase or potentially still be warrantied. Click "mynetgear" at the top, register an account and the device. From there you can check your support options.
2. many steps using tftp can fail. I'll include a the instructions link and a video walk through.
re you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through.
https://www.youtube.com/watch?v=R9DLrLQrpaw
3. if that doesn't work, you can try nmrpflash.