NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RAX70 Problem with AP Mode (AX6600 Router)
After putting the router in AP mode with either a fixed IP address or dynamic IP address, the router can not be located at the specified address or DHCP range after reboot. I've wasted many hours tr...
What router are you connecting it to?
Try factory resetting it. PUsh and hold reset for 7-15 seconds while powered on.
After you reset and reinstall it, when you put it in access point mode, leave the IP address info alone and let your primary router assign the IP address.
Then log into the primary router and look at its attached devices page (or equivelent). It should have the router listed and its ip address. You should be able to log in with that.
What router are you connecting it to?
Try factory resetting it. PUsh and hold reset for 7-15 seconds while powered on.
After you reset and reinstall it, when you put it in access point mode, leave the IP address info alone and let your primary router assign the IP address.
Then log into the primary router and look at its attached devices page (or equivelent). It should have the router listed and its ip address. You should be able to log in with that.