NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
guyinsb
Jul 01, 2025Aspirant
Registration is required
It appears that registration is required in order to configure the router (to change the SSID, for example).
CrimpOn
Jul 01, 2025Guru - Experienced User
Physical access to the device is required to change the SSID. Registration is not.
Perform a Factory Reset on the device and configure it. One step in the process is to change the WiFi SSID/password (if desired)
- guyinsbJul 08, 2025Aspirant
Here is my experience. After a Factory Reset, I connected (via an Ethernet cable to a LAN port) to a Netgear R6400 (pre-owned, purchased from eBay) using a browser directed to 192.168.1.1. I encountered a screen requiring me to register. My attempt to register failed, because the router had been registered by a previous owner.
- CrimpOnJul 08, 2025Guru - Experienced User
My experience with Netgear routers has been that every time I perform a configuration, the "Register this device" screen pops up and I simply ignore it and go on to the next screen.
It might be useful to examine that screen carefully.
- FURRYe38Jul 08, 2025Guru - Experienced User
When you see the registration screen appear in the browser, just navigate way from it and go to 192.168.1.1.
guyinsb wrote:
Here is my experience. After a Factory Reset, I connected (via an Ethernet cable to a LAN port) to a Netgear R6400 (pre-owned, purchased from eBay) using a browser directed to 192.168.1.1. I encountered a screen requiring me to register. My attempt to register failed, because the router had been registered by a previous owner.