NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Change wirless ssid name
I have a nighthawk R7800 dual band router. It was setup with only one SSID name so the 2.4 and 5.o ghz was not differentiated in the network name. Now I need to sometimes only access the 2.4 GHZ...
In version 1.0.2.52 of the firmware, smart connect was added to the R7800. Maybe the "applies to" didn't get updated. but if you're on that version or newer, you should have smart connect.
The same article walks through disabling it.
Thank you but this article does not appear to apply to the R7800 router, (at least its not listed as one of the routers the article applies to) I have a dual band not a tri band router. Right now there only 1 wireless network name for the 2.4 and 5.0 ghz bands. I want to go back to 2 seperate wireless network names - one for 2.4 and one for 5.0.
In version 1.0.2.52 of the firmware, smart connect was added to the R7800. Maybe the "applies to" didn't get updated. but if you're on that version or newer, you should have smart connect.
The same article walks through disabling it.