NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Atahan's avatar
Atahan
Aspirant
Mar 25, 2021

Detetcs all storage devices as 200MB

Hello, I am connecting my 1TB hard drive to my netgear router and it is being detected as a 200MB drive. I decided to switch to mac and it still showed 200MB, then I had tried to go into the router s...
antinode's avatar
antinode
Guru
Mar 25, 2021

   I know nothing, but I've read claims that the (not especially
competent) ReadySHARE software deals with only the first partition on a
storage volume.  If that first partition is some (small) "recovery" or
"EFI" partition, then you might see only that.

 

   In that case, you'd need to repartition the drive so that it contains
only one partition, and initialize that one partition with one of the
supported file systems.  Unless, of course, you really wanted to keep
the existing partition scheme for some reason, in which case, you'd be
doomed.

 

   Visit http://netgear.com/support , put in your model number, and look
for Documentation.  Get the User Manual.  Read.  Look for a topic like
"USB Storage Device Requirements".

  • antinode's avatar
    antinode
    Guru
    Mar 25, 2021

    > [...] if I need a driver, [...]

     

       If you needed a driver, then you wouldn't have seen that small
    partition.

     

    > [...] i can follow your instructions and partition the drive.

     

       I know nothing about your computer(s) or your (unspecified) "my 1TB
    hard drive".  I suggest that you look for information about how to
    partition/format a disk drive using whichever computer OS you have.