NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Tulsatime
Dec 03, 2020Tutor
EX6200 difficulty
I was doing a firmware update tonight. I think this thing is bricked. Upon power on the two network lights are amber and the connectivity arrows are flashing green. I cannot get the factory reset ...
- Dec 03, 2020
glad to hear it fixed it!
If you mark it solved, it might help the next person with that issue.
Tulsatime
Dec 03, 2020Tutor
The recovery reset procedure did not work. The TFTP did. I did a bit of reading through what you sent me...and it all worked as you said.
Kudos...much appreciated.
plemans
Dec 03, 2020Guru - Experienced User
glad to hear it fixed it!
If you mark it solved, it might help the next person with that issue.
- TulsatimeDec 07, 2020Tutor
Well...update. It worked for a few days and now it will not make a connection in the 5.4Ghz range. The light will not come on. When reset it blinks and does it's thing...but then ends up the 2ghz light is the only one that came on green. I have tried the WPA synch twice...no joy.
I tried the basic reset. I can try the factory reset...but have you seen this before?
- plemansDec 08, 2020Guru - Experienced User
you might be having hardware issues. try installing it using the installation assistant and not WPS
- TulsatimeDec 08, 2020Tutor
OK...thanks. I will keep plugging away at it. That was going to by my next step was to try settings via admin and the tool vs the automated way. will give you an update later!