NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

JamesGL's avatar
JamesGL
NETGEAR Employee Retired
Dec 19, 2017
Solved

Feedback for R7000 New firmware 1.0.9.18

Hi All,   Please post here for any update/issue related to the latest firmware 1.0.9.18. 
Firmware
  • FURRYe38's avatar
    FURRYe38
    Mar 08, 2018

    You should review this and maybe revert back to this recommended version of FW:

    https://community.netgear.com/t5/Nighthawk-WiFi-Routers/R7000-1-0-9-26-Feedback-Thread/m-p/1520141#M85677

     

    Alfikwrote:

    I've looked here again after a while and I can't belive the problem is still not solved....

    Since I've flashed Tomato a few weeks ago I've forgotten that I have a router- it's working perfectly getting dust because i do not touch it at all :-)...

     

    Parental control works perfectly, 0 drops, strong signal - save your time and do a similar thing!

     

aabshire's avatar
aabshire
Apprentice
Dec 23, 2017

Well less than 1 hour with firmware R7000-V1.0.9.20_1.2.28 and down from 28 devices attached to 15.   Turned off 5 ghz and guest again to see if that stabilizes it like the prior release(s)

  • Stooby2's avatar
    Stooby2
    Tutor
    Dec 23, 2017
    aabshire wrote:

    Well less than 1 hour with firmware R7000-V1.0.9.20_1.2.28 and down from 28 devices attached to 15.   Turned off 5 ghz and guest again to see if that stabilizes it like the prior release(s)

    Same here - Nest stopped communicating as did my network wifi printer. Switched off 5ghz and rebooted and everything is back again. So V1.0.9.20 isn't the solution.

    • HWAM's avatar
      HWAM
      Apprentice
      Dec 23, 2017
      Please tell me if you still are able to ping the devices. Do they still reply on a ping? In my case I always get a reply. No communication possible but I still reply on a ping.
    • aabshire's avatar
      aabshire
      Apprentice
      Dec 23, 2017

      It had it occur again after I had turned of the 5ghz radio, noticed I have the SSID broadcast still checked for 5 ghz & guest. Turned that off and so far so good.  Strange

      • aabshire's avatar
        aabshire
        Apprentice
        Dec 23, 2017

        Had the "No Internet" pop up on my laptop and my android loss connection. @ around 16:46 or so.  Checked the log and found this: (looks like DHCP refresh).
        [DHCP IP: (192.168.0.107)] to MAC address 88:DE:A9:10:A2:BD, Saturday, Dec 23,2017 16:48:05
        [DHCP IP: (192.168.0.109)] to MAC address 08:05:81:3C:C6:A5, Saturday, Dec 23,2017 16:48:04
        [DHCP IP: (192.168.0.152)] to MAC address 48:D6:D5:F3:90:02, Saturday, Dec 23,2017 16:48:00
        [DHCP IP: (192.168.0.105)] to MAC address 10:F1:F2:81:FF:A6, Saturday, Dec 23,2017 16:47:59
        [DoS attack: FIN Scan] attack packets in last 20 sec from ip [159.127.42.140], Saturday, Dec 23,2017 16:46:06
        [DoS attack: ACK Scan] attack packets in last 20 sec from ip [159.127.42.140], Saturday, Dec 23,2017 16:45:58
        [DoS attack: FIN Scan] attack packets in last 20 sec from ip [205.180.87.140], Saturday, Dec 23,2017 16:45:46
        [DoS attack: ACK Scan] attack packets in last 20 sec from ip [205.180.87.140], Saturday, Dec 23,2017 16:45:37