NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Genie crashed after iPerf test on R8500 (FW 1.0.2.80)
Hi, I have done some iPerf tests on my R8500 with last FW 1.0.2.80 . I have tried to change some settings on Genie to disable smart connect, but Genie is completly down. All other services work...
Any beta contact would have a IN to the r8500 project manager. Before deleting my list of past beta projects If I contacted any one of them they would forward to another project lead.
.80 has problems, the orignal release FW is fine regarding IPV6 speed,
IPV6 is 90MBps slower than IPV4 when tested, I have 180MBps DL & 20MBps on IPV4 which is what I'm suppose to have. When testing IPV6 is at 90 MBps using .80
While running same test on 5g1 with connected to a guest SSID broadcast and the main 5g1 not broadcast the router crashes. With .80 it will reboot with previous( .64 ) it locked up and even the reset wouldn't work, had to power cycle it.
Thanks for your reply.
Do you know how and where can I catch the R8500 log from telnet, because Genie is down and the debug page is not available too ?
I would like to send the log files.to Netgear team
thanks
Based on your signature I would think you had a contact at Netgear?
Yes and no, I think the beta team is no more available since some month (probably on other dev. project), I should go to this Official Netgear community to find some support about this issue.
Any beta contact would have a IN to the r8500 project manager. Before deleting my list of past beta projects If I contacted any one of them they would forward to another project lead.