NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS108V4 unmanage switch blocking ports 80& 443
I have an Arlo camera system that was working fine when connected to our WiFi router, but switched locations and it is now connected to the unmanaged ethernet switch. It stopped connecting, and they ...
Is there any NAT and/or WiFi router in this fiber Internet installation? If not, one system might work on the single public iP address you get from the ISP (intended for the WAN/Internet interface of a router) e.g. on your ONT, but your Orbi system does not have neither a private LAN IP nor a public address where it can reach the Internet - so it tells you the ports are bocked.
Unmanaged switches can't block ports. Your issue is somewhere further in your setup
microchip8 wrote:Unmanaged switches can't block ports. Your issue is somewhere further in your setup
This is correct - however Arlo does show this misleading message if it can't reach the cloud over 80/TCP and/or 443/TCP for whatever reason.
I originally had the WiFi router connected first and the unmanaged switch downstream. I recently swapped the locations in order to provide more ethernet connections where the WiFi router was connected. I'm sure this is the source of the problem, I will re-locate the devices and confirm. Then, I'll probably get another unmanaged switch to provide the quantity of ethernet connections I need. thank you for the responses.
