NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Deenkee-Du
Jun 29, 2021Aspirant
Has my Router been hacked??
Hello! Lately, I have noticed some very strange behavior from my router. Keeping in mind that I am not a compete noob - I have a general understanding of how TCP/IP and the 7 layer OSI model are sup...
slackrl
Jun 30, 2021Luminary
PS
Found this link also
And it may be close to what you are looking for to flash your router's firmware.
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
RSlack
- slackrlJul 08, 2021Luminary
slackrl wrote:PS
Found this link also
And it may be close to what you are looking for to flash your router's firmware.
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
RSlack
Tried this one myslef and could not get it to work
I have a NetGear WNDR4500v2 AC Rounter that will not grant access to the WEB site built into the router.
Downloadded Tftp64
After following the instructions:
-Never cam get the up-load to start “0 block retransmitted"
-The Server interface will at times drop the 162.168.1.10 or what ever ip address I set the
NIC Card, address and revert back to 127.0.0.1 Software Loopback Interface 1.
-Per instruction I do not see my router flash an amber power light after repowering.
-Per insturction with just waiting for the router to boot all the way...sitll no upload
This cound be a router problem not accepting a communication.
-Tried disabling windows firewall on PC still wont work.
Wanted to test this out to restore an older router and for this post.
Anyone with Tftp experience fell free to chine in.
RSlack