NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
How do I disable DHCP on my AP router?
I have an R7000 as my main router connect to the ONT/Modem. I have an ethernet cord going from the LAN of R7000 to the WAN of the R7000P. The R7000P is in AP mode. The main router (R7000) has wifi d...
If your R7000 is the main router, it must have DHCP enabled and working. If you set the R7000P in Access Point, DHCP is automatically disabled
microchip8 wrote:If your R7000 is the main router, it must have DHCP enabled and working. If you set the R7000P in Access Point, DHCP is automatically disabled
But in these images it says it is on.
https://i.imgur.com/kja2Gbb.png
https://i.imgur.com/bShZHlb.png
You haven't set your R7000P in proper Access Point mode, then
If AP is active, your main router (R7000) should assign an IP to it, which you then use to login into the R7000P AP
- I did a factory reset on the R7000P and reconfigured it as an AP. I set a static IP of 192.168.1.2 for the R7000P from the r7000 interface. As you can see from the images below.
https://i.imgur.com/sclQrJm.png
https://i.imgur.com/hx6t1Mx.png