NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How to optimize the file transfer speed between USB external hard drive and wired-LAN PC on R7000.
Hi everyone, Here is my configuration: I have R7000, updated to latest firmware. I connect my PC to router using Cat5e cable. I connect my USB 3.0 External Hard Drive (Western Digital 6TB) to...
PhamHuyBao wrote:
I think that I will leave everything as it is and accept that the transfer speed of 30-33 MB/s is the best that I can get with R7000.
TrustedReview measured the R7000's USB speed at 28-29 MB/sec, which is approximately what you are getting. http://www.trustedreviews.com/netgear-nighthawk-ac1900-802-11ac-router-review-setup-performance-page-2
The R9000 has 100 MB/s read speed and about 55 MB/sec write speed. https://www.smallnetbuilder.com/wireless/wireless-reviews/33046-netgear-r9000-nighthawk-x10-smart-wifi-router-reviewed?showall=&start=2
PhamHuyBao wrote:
- I got file transfer speed about 30-33 MB/s. What should I do to optimize the transfer speed?
- Along with Gigabit network card, I also have Killer NIC onboard, with the speed of 2.4 Gbps. I have disabled it since I don’t need it, do you think that if I use this Killer NIC instead of Gigabit NIC, it will improve the file transfer speed substantially?
Not much you and me can do.
A lot of stuff Netgear could do, should do, but refusing for years:
- support Jumbo Frames
- Update to a current modern SAMBA, including a current cifs.ko.
- support SMB 3.0 as available in SAMBA 4.x
OK, I'm comparing the Nighthawk X10- however there is a lot of headroom on the routers with less performant processors, too - a NAS similar to the R9000 (X10), AL-212 dual-core 1.7 GHz Cortex-A15 (about "half" of the X10), can read >200 MB/s (>170 MB/s with AES256 volume encyption) and write >165 MB/s (>145 MB/s with AES256 volume encyption) on average HDD set (RAID0 or RAID1) on single large multi GB files. Or something in the range of 70..80 MB/s over the non-exclusively used X10 5 GHz WLAN.