NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

GearNetRouter's avatar
GearNetRouter
Virtuoso
Nov 21, 2016
Solved

LAN access from remote R7000

Can someone explain what is happening? I am using a Netgear router R7000 Nighthawk router:  [LAN access from remote] from 52.197.117.189:59461 to  IP for DLINK 2630, Saturday, Nov 19,2016 04:26:46...
Security
  • GearNetRouter's avatar
    GearNetRouter
    Nov 23, 2016

    Thanks to both of you. I disabled UpNP and the cams (DLINK) still work. However, it seems I don't get any 1 minute limit. The clock shows serveral minutes have passed now and I get no message it has stopped. There is no motion in the background but I dont think its an issue as the clock is still ticking....

     

    Looks like by default this router enabled UpNP and DLINK's software set up each cam for the user without any warning of the implications.

     

    BTW do you know why an Android device would show as an attempted outside connection? Is this due to an intruder just scanning for things?

     

    Will check the logs later and report again to see if any outside connections. 

TheEther's avatar
TheEther
Guru
Nov 22, 2016

These are not just attempts but actual intrusions.  Are you using port forwarding, DMZ or UPnP?  These are used to open up access to home network.  If you have no need for them, then you should turn them off.  

 

I discovered this website recently.  It provides a very basic primer on home networking concepts.