NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
LED Power Blinking AC1750
The amber “power” LED slowly blinks. No other LED’s are on or blinking. Tried unplugging, waited 8 hours for updates, and pushed reset button. Problem persists. Any ideas what to try next?
- It was not brand new. It was about 6 months old. It was still under hardware warranty.
There is support stuff, including a manual, for the R6300v2 somewhere at the end of this link:
>>> R6300v2 | Product | Support <<<
Murrellj91 wrote:
The amber “power” LED slowly blinks.
The manual will tell you that this is down to corrupt firmware, as your screen grab show.
If it does not respond to the standard factory reset, the next thing to try is a recovery reset.
- Press reset for 30 seconds
- Keep pressing reset while removing power
- Keep pressing reset for another 30 seconds while apply power
That might let you in with the browser interface to mend the firmware. If not, then it may, indeed, be TFTP as a last resort.
How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support