NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
mY MAC says I'm not connected to WiFi and I don't know why. My 7000v2 looks ok.
I thought I had nether on the phone and I wanted to reseat my modem to prior settings before talking with HP for a new printer last month which I returned. Meantime, my modem isn't running right. wh...
Is that a C7000v2 by chance?
What channel configurations are currently set on the router?
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update?
Be sure to restart your network in this sequence:
Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on computers and rest of network.
Has a factory reset and setup from scratch been performed since last FW update? A complete pull of the power adapters for a period of time after the factory reset then walk thru the setup wizard and setup from scratch with a wired PC and web browser. Recommend setting the default DHCP IP address pool range to the following after applying and a factory reset: 192.168.#.100 to 192.168.#.200.
https://kb.netgear.com/24089/How-do-I-specify-the-pool-of-IP-addresses-assigned-by-my-Nighthawk-router
ptdemers wrote:
I thought I had nether on the phone and I wanted to reseat my modem to prior settings before talking with HP for a new printer last month which I returned. Meantime, my modem isn't running right. what's going on!