NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
My R7000 bricked during update to V1.0.9.18_1.2.27
During upgrading my router something went wrong. Now I can not connect to my router. Even trying to reset or reflash with tftp will not work. What to do?????
A friend had the solution.
I used TFTP2.EXE on my laptop (Windows 10).
He told me to uninstall TFTP2.EXE and activate TFTP on my windows 10 laptop.
After that i run CMD and type TFTP -i 192.168.1.1 PUT R7000-V1.0.9.18_1.2.27.chk
This is for me the solution. My R7000 is working again.
If your willing to open the router up you reflash the router with the use of a serial cable there are many videos on the web that show how to this may be your only chance to sve the router if you can not access routervia a lan port. I would clear the nvram before you refash the router there still may old data in it causing poroblems.
A friend had the solution.
I used TFTP2.EXE on my laptop (Windows 10).
He told me to uninstall TFTP2.EXE and activate TFTP on my windows 10 laptop.
After that i run CMD and type TFTP -i 192.168.1.1 PUT R7000-V1.0.9.18_1.2.27.chk
This is for me the solution. My R7000 is working again.