NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
DRESTL
Apr 28, 2020Aspirant
Netgear R6700v3 Router troubleshooting
My router seems to reset each 48 hours. I have troubleshooted my modem, with no issues there. Each 48 hours I have to reset (power toggle) the router. You could set your watch to the times t...
- May 02, 2020
A quick update. so far so good. If the 48-hour repeating of the disconnection has been disrupted or eliminated by the router reset, I do not know at this point.
A quick question though, would you suggest that I disable auto updates a firmware on the router? In the Netgear community I've seen several reports of issues with new firmware upgrades.
As always, I appreciate your help. I'm going to keep this thread going until some time passes and I'm assured that the problem is solved.
Dan
DRESTL
Apr 28, 2020Aspirant
I am simply power recycling, not doing a factory reset.
My ISP is Spectrum internet
FW is V1.0.4.84_10.0.58 and I have not tried an earlier version of the firmware.
I'm making changes to the settings one at a time, and today I turned off the automatic updates, in case they were causing the issue.
plemans
Apr 28, 2020Guru - Experienced User
DRESTL wrote:I am simply power recycling, not doing a factory reset.-----trying a reset isn't a bad start.
My ISP is Spectrum internet------wth what modem?
FW is V1.0.4.84_10.0.58 and I have not tried an earlier version of the firmware.------a downgrade is sometimes worth trying after you've tried the factory reset.
I'm making changes to the settings one at a time, and today I turned off the automatic updates, in case they were causing the issue.
- DRESTLApr 29, 2020Aspirant
Unfortunately my Modem doesnt show a manufacturer... The Model Number apparently is E31U2V1.
i'm trying to accomplish this in stages, so I can keep track of single changes, rather than guess at which multiple stage worked or did not.
I really appreciate your help.
Dan
- DRESTLApr 29, 2020Aspirant
- plemansApr 29, 2020Guru - Experienced User
So start with the factory reset. If that doesn't help.
Then try installing firmware version 1.0.3.66, factory reset again, and manually install. (not from backup)
- michaelkenwardApr 29, 2020Guru - Experienced User
DRESTL wrote:
Unfortunately my Modem doesnt show a manufacturer... The Model Number apparently is E31U2V1.
Does it have a row of LAN ports somewhere? Does it do wifi?
- DRESTLApr 29, 2020AspirantIt does have two ethernet ports in the back, I have no idea if it does Wi-Fi or not.