NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
NETGEAR R8000 AC3200 Nighthawk X6 Random restart and drop all connections
Hi, I have an issue with my NETGEAR R8000 AC3200 Nighthawk X6 router. I was working fine with default firmware V1.0.3.4_1.1.2. Couple of months ago I installed the latest firmware V1.0.4.88_10.1....
- None of your solutions didn't work. I upgraded to
Firmware Version 1.0.5.88 and it becomes worse.
It looks like the issue is Netgear firmware. It fills up the memory and use all CPU cause to restart the router in heavy load. It started to over heat.
So I decided to flash the router with the Freshtomato open source firmware and everything is working smoothly. Now I can get over 800Mbps internet speed. I downloaded lot of small and big files for hours and that old issue never raised.
So I can confirm it is a Netgear firmware issues. If anyone has the same issue no point of posting here. Just flash your router with Freshtomato https://freshtomato.org/
Thank you.
Thank you for your reply. I can't see any model number in ONT. Anyway it should be re-branded model of Nokia-ONT G-010G-Q. Here is the photo of it.
ONT and router is connected with the original Cat6 cable which provided by BT Openreach.
It is still working without any issues with original BT router.
I don't use Armor, IPv6, Guest Network, Smart Parental Controls or Circle, Traffic Meter.
One thing I notice is once I upgraded to latest firmware Internet speed has dropped dramatically by 150Mbps to 200Mbps. Now I'm getting around 500Mbps to 600Mpbs on 900Mbps full fiber BT broadband connection.
I already tried everything you explained except factory rest.
Router isn't restarting when I don't use it for download large files. Router isn't over heated or anything when it restarts.
Do you think router NVRAM is full?
Thank you.
Looks like a standard optical network termination (ONT). No router involved. (BT probably gave you one of its "Hubs".)
Anuruddha08 wrote:
I already tried everything you explained except factory rest.
You should try that, especially if you have been using this router on an older Internet service. You need to get it to forget any settings acquired from that connection.
If you don't want to go the whole hog with the reset, start by taking the R8000 through its Internet setup wizard.
- Advanced
- Setup Wizard
Just another user with time on their hands.
Yes it doesn't have any router. BT has provided router which is plunged to ONT with a RJ45 cable. I just removed the BT router and plugged it directly to Netgear R8000 Internet port. Anyway it works fine without any issues with original firmware.
I already factory rest the router before set it up with new fiber connection.
I have found Parental control (Circle) was enable. I disable it. Now it is bit stable for some time. But suddenly loosing all wired and wireless connections. It doesn't work until restart the router.