NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
night hawk R7000p firmware upgrade failure
OS is Windows 10. I noticed that the nighthawk R7000P AC2300 had an firmware upgrade notice. the upgrade was for the 1.3.1.44 version.
I don't remember what the old version was , I know the las...
jetspeedz wrote:
tftp the firmware its not hard
Nor is it that easy:
How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support
Further guidance is out there in Googleland.
jetspeedz wrote:
tftp the firmware its not hard
Nor is it that easy:
How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support
Further guidance is out there in Googleland.
that link did the trick.
some of the other tips weren't clear or confusing on where to go to change the IP address.
that document could be a little bit more clearer on the setting of the TFTP IP address and on which router port to use during TFPT; that part wasn't clear also.
thanx.
firestorm31 wrote:
that link did the trick.
Not sure which link you mean – you haven't marked the relevant message as Solved – but it is hard to disagree with this bit:
that document could be a little bit more clearer on the setting of the TFTP IP address and on which router port to use during TFPT; that part wasn't clear also.TFTP isn't meant for amateurs like us. But it can be the only way out of a hole.
Glad it worked out in the end.