NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

adi99's avatar
adi99
Aspirant
Dec 28, 2021

Nighthawk LAX20 Remote Management

Model: Nighthawk LAX20

Firmware: V1.1.6.30_2.0.50

 

I cannot find the Remote Management option mentioned on page 109 of the LAX20 user manual in the web interface. According to a message in this post started by robatl it looks like Netgear has removed the option (or it never existed?).

 

What is a good way to enable access to the router web admin console remotely?

 

The Nighthawk app with Connect Anywhere enabled is not a solution since the app does not have anywhere close to the capability of the router's web admin console.

 

Thanks

 

4 Replies

  • michaelkenward's avatar
    michaelkenward
    Guru - Experienced User

    adi99 wrote:

    I cannot find the Remote Management option mentioned on page 109 of the LAX20 user manual in the web interface. According to a message in this post started by robatl it looks like Netgear has removed the option (or it never existed?).

     

     


    They have moved things around. It now goes under the "Web Services" label.

     

    On my router:

    • Advanced
    • Advanced Setup
    • Web Services Management

    It might be different on your LAX20, It isn't one of the Nighthawk WiFi Routers covered here.

     

    A couple of places to try:

     

    Nighthawk Routers with WiFi 6 (AX) - NETGEAR Communities

    Mobile Routers, Hotspots & Modems

    Those things are very different from the standard Netgear routers covered in this section.

     

     

     

     

     

     

     

     

    • adi99's avatar
      adi99
      Aspirant
      Michael, you may have missed the post I linked in my question, it looks like it was confirmed by Netgear that the option has been removed. So I wanted ask what other folks are doing as an alternate.
      • michaelkenward's avatar
        michaelkenward
        Guru - Experienced User

        adi99 wrote:
        Michael, you may have missed the post I linked in my question, it looks like it was confirmed by Netgear that the option has been removed. So I wanted ask what other folks are doing as an alternate.

        Perhaps you also missed my messages over there.

         

        If this does not meet your needs:

         

        How do I enable or disable Anywhere Access on my router using the Nighthawk app? | Answer | NETGEAR ...

         

        you will have to find some other way to sneak up on your device from the outside world. There are complicated ways of getting in with the IP address of your router, but that may not apply to those LTE devices. It is still there in my R7800, as I explained previously.

         

        As the LAX20 does not qualify as one of the Nighthawk WiFi Routers, the folks here may not have much to offer. They probably don't need an alternative. You need to talk to the LTE community.