NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Port forwarding not working
Port forwarding table set up identically to Linksys router. Cannot open any port. I have 5 webcams with static Ips each using a unique port. Latest firmware: V1.1.0.32_1.0.1. Cams all work fine with ...
Sorry, I thought I had closed this thread. The problem was that my cameras were still configured the the other router's gateway address. Once I changed the cameras' settings, everything worked. Many thanks to Netgear tech support who spent an hour on the phone to find my problem.
uPnmP off for sure. vanilla docsos 3 modem with no router
Should work ok if you have the PF configured correctly.
1 camera5 8195-8195 8195-8195 192.168.0.195 2 camera4 8194-8194 8194-8194 192.168.0.194 3 camera6 8196-8196 8196-8196 192.168.0.196 4 camera1 8191-8191 8191-8191 192.168.0.191 5 camera3 8193-8193 8193-8193 192.168.0.193 Looks good to me. Is it necessary to reserve the ports in the LAN setup? I tried that. The cameras kept losing frames and I still couldn't open the port. So I deleted the reserve table.
Hi nigelburnett,
Can you check the IP address of the router if it is 192.168.0.1 or 192.168.1.1.
Sorry, I thought I had closed this thread. The problem was that my cameras were still configured the the other router's gateway address. Once I changed the cameras' settings, everything worked. Many thanks to Netgear tech support who spent an hour on the phone to find my problem.
