NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

routerkm's avatar
routerkm
Aspirant
Apr 10, 2017
Solved

R7000 2.4ghz Wifi crashes internet

I have a ADSL2+ modem that connects (via a switch) to my R7000 router. Even after a hard reset, putting it in Access Point Mode and disabling QOS, as soon as the 2.4GhZ wifi is turned on, the entire...
Troubleshooting
  • routerkm's avatar
    routerkm
    Apr 10, 2017

    Hi

    Thank you for your reply.

    I think I may have fixed it. Whilst I beleived nothing was connecting to the wireless connection as everything seemed either off or disconnected, I changed the wifi network password to force disconnect everything from connecting. Then once I turned the wifi on the internet did not come to a hault on any device.

     

    The r7000 still acts as a AP as the modem does have a wireless.

     

    Thanks for your response. Hope this may help someone solve their issue.

     

    thanks

mondenath's avatar
mondenath
Prodigy
Apr 10, 2017

Can you try setting the r7000 as router instead of AP. As the Modem doesnt have a wifi. You can set it as router. The AP is only suited well if you are extending the exisiting wifi to another room when connected wired. As AP does lose the most usefull feature even one decided to not use.

 

 

  • routerkm's avatar
    routerkm
    Aspirant
    Apr 10, 2017

    Hi

    Thank you for your reply.

    I think I may have fixed it. Whilst I beleived nothing was connecting to the wireless connection as everything seemed either off or disconnected, I changed the wifi network password to force disconnect everything from connecting. Then once I turned the wifi on the internet did not come to a hault on any device.

     

    The r7000 still acts as a AP as the modem does have a wireless.

     

    Thanks for your response. Hope this may help someone solve their issue.

     

    thanks