NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
R7000P
In my genie it shows my wireless signal is off with a yellow triangle with an exclamation point in it. Does that mean my wireless is burned out or what?
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
There a screen capture of this you can post for us to see?
Is the WiFi button on the router been pressed for 5 seconds then release?
Try a factory reset and setup from scratch?
Did a factory rest and turned on and off the Wifi button and the radio signal twice and still nothing. It has the latest firmware and I have Comcast 1gig internet
Does the wifi radios show as enabled on the routers web page under Advanced tab/Advanced/WIreless settings? Should be check marks seen in the boxes that indicate the radios are enabled.
If not, possible the wifi radios are toast. You could just disable these check boxes and connect up a external ethernet connected wireless AP or router configured for AP mode and continue to use the R7000P for it's wired abilities.