NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
R7800 wireless clients cannot connect to lan clients
Hello, I have the latest firmware 1.0.2.04 on R7800 and have an issue where my wifi client cannot access servers on lan on the same router. I found suggestions about firmware resets and turning o...
evel I'm using Kong Mod from myopenrouter.com. It's a straightforward process on how to replace the firmware (just look at the latest article). For VLAN tagging, you'll need to create a VLAN on eth0 (default WAN) interface (Setup->Networking) and assign a newly created port as WAN port on the same page. Once you're online - you can easily do the rest (wifi, services, etc). WIFI->LAN works right away.
Thx, Mansus.
Nope. None are using guest. Actually I tried guest wifi with enabled option to be able to see other clients but that didn't help either.
Use Ping to see if you can ping a LAN device from a WIfi
Can ping no problem but none of the LAN resources are available on any of LAN clients (SMB, HTTP, RDP, etc). Seems to me a bug in a firmware (it was already reported as fixed in one of the previous versions but looks like it's back).
are u using the same PC on Wifi to Wifi and Wifi to LAN. Since it works on ping then it should work on other services unless your PC is restricting the inbound traffic/service.
