NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
R8000 Date and Time incorrect
Firmware Version V1.0.3.36_1.1.25 Just cannot get this router to set the correct date and time from the internet, which makes the scheduling function useless. Tried all the other suggestions men...
Hi mmmix,
Have you tried this firmware?
https://kb.netgear.com/000038688/R8000-Firmware-Version-1-0-3-46
Reset it after the update.
It's Comcast with an Xfinity modem TG862G set in bridge mode
It should be able to go out on the web and pull the time and date in for the router use.
It *should* but it doesn't, that's the issue... Plenty of people have reported it in these forums, and I know some "special" firmware has changed hands, but I'm on the latest (I think)...
Are you able to edit the IP address for the NTP server?
I can't see anywhere in the settings to change the NTP server. The PCs on my network can see a range of NTP servers with no issue.
I also saw something about a beta firmware can not remember which model router is was for and if it work even it was the r8000 and work only people on a list were able to receive it from netgear support channels for testing.
I know this is not much help