Forum Discussion

mmmix's avatar
mmmix
Guide
Apr 08, 2017
Solved

R8000 Date and Time incorrect

Firmware Version V1.0.3.36_1.1.25   Just cannot get this router to set the correct date and time from the internet, which makes the scheduling function useless. Tried all the other suggestions men...
Troubleshooting
FURRYe38's avatar
FURRYe38
Guru - Experienced User
Jun 04, 2017

If you keep the WNDR as the main host router and want to use the R8000 behind it, be sure to use the DMZ on the WNDR for the IP address it gives the R8000. However I recommend swapping around routers like William mentioned. 

rednevals's avatar
rednevals
Tutor
Jun 04, 2017

What will adding the r8000's IP address(192.168.1.2) as a DMZ on the WNDR(192.168.1.1) accomplish? 

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User
    Jun 04, 2017

    Allow all ports and traffic unhinder by the WNDR router, to the R8000 router. Sometimes I do then when testing two routers in line. Helps with double NAT issues in this configuration. 

    • rednevals's avatar
      rednevals
      Tutor
      Jun 04, 2017

      It still does not allow the r8000 to get the time from NTS...

       

      Also: WNDR(LAN),DHCP(on) -> R8000(LAN). DHCP(off).

      • FURRYe38's avatar
        FURRYe38
        Guru - Experienced User
        Jun 04, 2017

        Need to connect the R8000 with its WAN port to the WNDR routers LAN port when using this configuration with DMZ. Time features required the WAN port to be used.